Has your garage door begun to act up and you are worried that a mere garage door repair job is not going to be enough? Well, the good news is, you do not have to completely replace your garage door openers. All you have to do is to perform a few garage door repairs that are going to take care of your problem.
You can perform a few repairs without the help of any professional. However, some repairs are more complicated and should not be attempted by the nonprofessional. If you do so, you might end up injuring yourself. Plus, you might also cause more damage to the garage gate than repair!
Why do you need the repair?
First, you should note what problems you are facing with your garage gate. Is the door simply not responding? Or is it closing and opening partially? Do you find that the garage opener is running, but not opening? You will find that the repair work for each of these cases is different.
What work does garage gate repair involve?
Light repair works usually involve cleaning, lubricating and tightening the tracks, springs and the loose parts of the system. You should first check if the power supply to the opener is intact. Sometimes, if the power is not reaching the opener for some reason, your garage door will be stuck, and you will be left wondering what went wrong!
What kind of garage opener do you have?
When you are planning to perform some garage door repair, you should first find out what kind of opener you are using. If it is a standard extension garage gate, you can easily carry out the repair works, once you are able to find out what is going wrong with the machine.
However, if your garage door is making use of a torsion spring, you will have to call in a professional to help you with the repair works. The torsion spring door is under tremendous pressure, and thus, one wrong move may even turn out to be fatal for you.
Other garage door repair works
If you are looking for a temporary fix for your garage gate, you can disconnect the opener from the door, by pulling on the red string that you can see on the side of the door. This way you can operate the door manually. However, be careful, because if the problem lies in the spring of the door, it might fall suddenly on you.
Check all the loose hardware to make sure that nothing is out of place. Also check the springs and see if they are hooked on to the right place. If, while carrying out the garage door repair you face any difficulty due to the tension in the springs, try to adjust them by hooking them to the next notch. This will make it easier for you to work.
Finally, never forget that the best way to keep your garage door in good condition is by regularly carrying out maintenance work on your door. This will ensure that you do not have to spend buckets on repair and replacement works.
Garage Door Repair - Important Things to Consider
Garage door repair may often be done by the homeowner themselves. There are at least 5 simple things to check, before calling a professional. Some repairs are extremely easy. For example, a stiff or a squeaky door will merely require a good cleaning and lubrication. Other repairs, such as repairing a torsion spring, are extremely dangerous and require help from a professional.
Before proceeding to the repair, make sure to unplug your garage door opener, so that you do not get an electric shock while you are repairing your garage door. You will most likely be standing on a ladder, which is a very bad place to get an electric shock, since you may also fall off the ladder. Also, remember to wear safety glasses when working with power tools.
Here is a list of things to check before calling for a professional for your garage door repair:
1. Check the Metal Tracks for Damages
This easy garage door repair tip may often solve the problem very fast. The metal tracks often may have dents or bumps. If you find any such damages, strike the damaged part of the track with a wood block and a hammer to straighten the track.
2. Check the Alignment of the Tracks
If the tracks are not aligned well, they may be causing the door not to work. It's not always necessary to unscrew the tracks; you can just try to loosen the bolts or screws and to tap the tracks slightly into position. Use a level to check the alignment of the tracks. Aligned tracks will let you be done with your garage door repair in no time.
3. Clean and Dry the Tracks
Even though it may sound obvious, but hardened dirt and old lubricant may be the cause of the garage door sticking. In this case, your garage door repair may consist of merely cleaning the tracks and then drying them. You can use regular cleaners to clean the tracks.
4. Lubricate the Tracks and the Rollers
Merely lubricating both, the tracks and the rollers, can fix the problem and conclude your garage door repair in no time. For lubrication, you may use a lubricant spray or a silicon spray. It is probably better to lubricate the tracks after cleaning them. Actually, any movable part will benefit from lubrication.
5. Tightening the Loose Bolts and Screws
Bolts and screws tend to become loose with time. Try to check all of the screws and bolts involved in the opening/closing mechanism of your door. Sometimes, merely tightening them may solve the whole problem. If you cannot tighten the screws, because the holes themselves have become loose, then you can use a "wood filler" or pieces of normal wood to fill the holes.
What Not to Do?
If you have tried every one of the above solutions, and none of them have worked, the problem may be the door spring. However, it is advised not to perform your garage door repair if the problem seems to be the spring, especially if it's a torsion spring. Unfortunately, there have been numerous cases, where people have gotten injured or even killed by the garage door springs. One of the most common injuries is a hit in the head, resulting in serious trauma to the brain.
If you have doubts in your garage repair, by no means should you attempt it. It generally will not cost too much. However, a professional will save you from any injuries.